My wife transitioned into my older GS4 (i337) after her GS3 power button failed. The GS3 was repaired and set aside as a spare (good idea). After getting settled into the GS4, it experienced a water "event". She was wise enough to pull the battery and get it into some rice. It stayed there for a few hours until I could get to it. She said it only had a little water inside, but the rice was a precaution. The water indicator on the battery only had one tiny bit of pink . Guessing the Trident Aegis case did some good protecting there. I took the phone out of the rice and placed it under a desk lamp that has a history of being a bit of a heat lamp. I used it to warm the phone for a few hours before I checked the phone's viability.
I kept the SIM and the SD card out for first power up attempt. ALIVE! I noticed that the battery was low, so I connected a charger. No chargee. Reboot no help. Powered off and attempted to charge. When powered off, it did give a short vibration and a quick screen flash, maybe a few lines, every 6 seconds. Expecting that the phone would work, but not have charging capabilities. Quite inconvenient.
What parts could I throw at it? Since the charging port was really the only place water could have gotten in while the phone was on, I decided to throw that part at it. I found this one (http://www.amazon.com/gp/product/B00...ilpage_o02_s00) on Amazon, so figgered I would give it a chance. Took about 20 minutes to replace it.
Jackpot. Charged right up, plobby faster than I had previously experienced.
If you experience a water "event" and the device wakes, but won't charge, this could be the fix. The part I ordered came with everything you need (tools). There are several videos on youtube that show you everything you need to know. Watch a few before you begin. Some have hints and pointers that others don't.
Hope someone finds this post helpful. Thank me if you do!
I kept the SIM and the SD card out for first power up attempt. ALIVE! I noticed that the battery was low, so I connected a charger. No chargee. Reboot no help. Powered off and attempted to charge. When powered off, it did give a short vibration and a quick screen flash, maybe a few lines, every 6 seconds. Expecting that the phone would work, but not have charging capabilities. Quite inconvenient.
What parts could I throw at it? Since the charging port was really the only place water could have gotten in while the phone was on, I decided to throw that part at it. I found this one (http://www.amazon.com/gp/product/B00...ilpage_o02_s00) on Amazon, so figgered I would give it a chance. Took about 20 minutes to replace it.
Jackpot. Charged right up, plobby faster than I had previously experienced.
If you experience a water "event" and the device wakes, but won't charge, this could be the fix. The part I ordered came with everything you need (tools). There are several videos on youtube that show you everything you need to know. Watch a few before you begin. Some have hints and pointers that others don't.
Hope someone finds this post helpful. Thank me if you do!
Download from this link
Aucun commentaire:
Enregistrer un commentaire