G3 (D850) Bricked need help!

I have been having issues with my phone random restarting and sometimes it would go through the app optimization process. So I decided to do a full wipe and install CM13. Everything has been great for the past week but, today it did a random restart and went through the optimization process. However, this time it didn't come out of it but, instead looped back to the boot animation and then optimized again and continued to do this. I tried opening recovery to wipe and reinstall but TWRP gets stuck at the splash screen. I have tried reverting to stock but for some reason the LG Flash Tool gets stuck at "Waiting for Connection". I have tried different computers and USB ports to get the Flash Tool to work but have not had any luck. I'm looking for any help or suggestions that people can give. I am willing to try pretty much anything right now.

Download from this link

Nothing working for soft bricked tab 2

I am hoping someone can help me because I have run out of ideas. I had Candy5 5.1.1 rom on my Tab2 10.1 and it was working for a while with intermittent reboots. Then it suddenly would reboot after just a few seconds. Nothing I have tried has worked, including:
1) a hard reset-I have tried wiping and resetting from CWM and from the settings but when I reboot it nothing is wiped or reset.
2) installing a new rom- I have tried installing multiple other roms from both the SD card, the internal sd card, and odin. They flash successfully but when I reboot I am right back to Candy5 and the reboot loop after a few seconds.
3) using odin-I have tried using oding to flash stock firmware, custom firmware, and a new recovery. Odin will say FAIL for the stock firmware, but for the others it will say PASS but there is still the same CWM and Candy5.
4) Sideloading- same results as above
5) installing a new recovery from SD card-nope.
6)Using ADB and fastboot-Fastboot will not recognize my device even though I have the correct drivers installed--I have also tried all the USB ports available with no change. ADB won't recognize my device for a wipe, but it will for installing another custom rom or recovery which of course does not work.
7) A few times I have had time before it reboots to try uninstalling apps. It tells me they are uninstalled but when I reboot they are back.
8) Also when it stayed I tried going into superuser settings to reset them but even though it says they are reset nothing happens after reboot.

A couple things to note:
1) it is a p5113 but has a p5110 rom and identifies itself as p5110 in download mode. This however, has not been a problem before.
2) I am running Clockworkmod Recovery v6.0.2.3
3)When I try to exit recovery I get the error message "Root access possibly lost. Fix?" and then the Yes response is "Yes-Fix root (/system/xbin/su). If I choose yes, though, it does nothing and simply reboots. Same if I choose no.
4) gapps are installed and I am certain I installed the correct version of these.

Thank you for any help you can give me. It's an old tablet but I have gotten a lot of great use from it until now!

Download from this link

probably bricked phone - plz help

Hello
I wanted to run custom neatrom and when I was uploading PhilZ-cwm6-XXMS1-OXA-4.53.tar with (custom rom + root) with odin, mobile didnt turn on - was hanging on samsung logo. So than I have decide to go with 3 files rom with odin and it failed !

<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.m d5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Right now my battery is drained - probably it is not charging anymore I can't go to download mode (probably because of drained battery). Is there a way to rescue my phone or I have to buy new motherboard ?

Download from this link

Please help samsung galaxy s6 edge bricked after root attempt

I tried rooting my samsung galaxy s6 edge and it failed and said seandroid not enforcing, then i tried to install android again and now i can only go into download mode and the screen that says that the update failed and to connect to samsung smart switch, which wont work because it tripped knox. Please help.

Download from this link

sony xperia s(lt26i) bricked and i have no idea what to do :(

Hi ! this is my last resort in hoping to find solution about my bricked android device..
my device is :
Sony Xperia S ( LT26i)
before i tried to root my device it was running on :
Android Version : 4.1.2
Baseband Version : 8660-AAABQOLYM-314010-39
Kernel Version : 3.4.0+1.0.21100-313065-gIccebb5-00193-gcbc50fc
BuildUser@BuildHost))#1 SMP PREEMPT
Tue Jul 23 15:55:38 2013
Build Number : 6.2.B.1.96
my device now is completely dead and when i try to charge it only shows red on LED.
when i connect it to pc also red LED and my pc wont recognize it.
even holding volume down and connect usb doesnt work.
please help me ? :(

Download from this link

HTC Desire 616 Dual Sim Bricked error S_DL_PMT_ERR_NO_SPACE(5069)

Recently i played Real racing 3 after played and close game i got error from google play store force closed, then i reboot my device i faced bootloop so i decided to clear cache still wont boot then i try to hard reset but hard reset not complete.
i tried to reinstall stock rom using sp tool i got some error S_DL_PMT_ERR_NO_SPACE(5069). I used this stock rom many time before it success but this time it was not working n give me error ,, i tried many steps i try in another pc then i tried different rom different port different version of sp tools,,, i checked memory test also (NAND Flash: ERROR: NAND Flash was not detected!)i doubt it hardware problem in my phone not software or pc problem i just want make sure....
please help me if anyone has solution for this :crying: :crying: :crying: :crying: :crying:

Download from this link

samsung captivate bricked

Hi Guys i need to know because one person brought samsung captive bricked not charger and i charger the battery on other samsung captive i put the battery full on the phone brincked and the screen on then the phone is in mode download but one issu when i put de usb on my compute the phone don't connect on odin and i put off the phone and on phone present boot att ..... so present cyanogenmod and Miui XD have 2 OS when in miui boot the phone down and y dry again phone in home screen very slow and a wait connect the phone on my pc and don't connected.
what happend why the phone ??? i don't know is the driver phone don't have ?? i don't have idea what happen why don't connected will work driver phone with usb jig ???

Download from this link

i9100 bricked screen

hi,
my friend have bricked th screen but touch screen continue tu work.
i want to connect it to pc whit samsung kies but there is 1 problem: unlock screen whit code.
i know code...is 2402 and when i turn on the phone i can listen if i tap, the sound of lock screen pin mode, i have understand where are the numbers...but i don't know where are OK for unlock the pfone and backup it whit kies...
the phone have original lock screen, can anyone post me the original image of lock screen? if i know there are cancel key and ok key i can insert code whitout screen but whit only sound.
thank you

Download from this link

[GUIDE][UNOFFICIAL] Unbrick Your Hard Bricked Yureka/Yureka Plus

Is your Yureka/Yureka Plus hardbricked? (QDLoader 9008 mode)
Do you keep getting sahara fail error while trying to revive it using QFIL?
Wait no more... Just follow the instructions below and you may have a working Yureka/Yureka Plus again.

DISCLAIMER: I have personally revived my Yureka Plus using this method and tested it by hardbricking and unbricking my device 3 times before posting it here. I bear no responsibility of whatever that happens to your device/sdcard/computer by using this guide. (Well a dead device couldn't get any worse)

What will you need?
• A dead Yureka/Yureka Plus.
• A PC/Laptop.
• A 16GB or above MicroSD Card.
• Win32DiskImager
• eMMC image of Yureka. Download
• Yureka/Yureka Plus fastboot images. Download
• Fastboot flashing tools package. Download
• Knowledge of how to use fastboot.
• A little brain and common sense.

Steps:
• Connect your MicroSD card to PC in mass storage mode using any card reader or old phone which supports mass storage mode.

• Format your MicroSD card in FAT32 format, quick format will work.

• Extract Yureka's eMMC image to a folder it will take some time and it will be of 14.5 GB after extracting.

• Install Win32DiskImager and write Yureka's eMMC image to your MicroSD card. Kindly select the right drive letter for your SD card otherwise your will severely damage any other drive or your PC hard disk.

• After successful completion of writing eMMC backup image to SD card, insert the MicroSD card in your device and remove all sim cards. Insert battery into your device now.

• Extract the contents of the fastboot images into a folder.

• Extract the contents of the flashing tools zip into the same folder
To make sure, check that system.img, boot.img etc files are in the same folder as flash-all.bat, fastboot.exe etc

• Connect your phone in fastboot mode, steps for which are : -
A. Press and hold the Volume Up key
B. With the Volume Up key, connect the phone to your PC/Laptop with USB cable
C. You can let go off the Volume Up key when the display lights up and shows random colored lines in case of Yureka Plus or (Fastboot mode/ Any other random thing which I don't know since I don't have Yureka to test) in case of Yureka.

• Run flash-all.bat by double clicking on it.

• A command window will open and flashing procedure will start

• DO NOT disconnect the device during flashing procedure

• The command window will close after the flashing process is over.

• Disconnect the USB cable, remove the microSD card and boot the phone normally by long pressing the Power button.

NOTE: This guide is not complete and a lot of stuff/steps/files needs to be added to deal with special cases and for different devices like Yureka Plus on Android which I will do later when I get time.
This guide should work fine for most of the cases where you simply bricked your device and not able to go into fastboot mode.

A tip for Yureka Plus users:
If the random colored line has stuck on your screen like they did on my device, just download any screen burn in tool from playstore and leave it running continuously for 2 to 3 hours, it will fix those lines. If that doesn't fixes your display then leave it running overnight.

Credits:
YU/Cyanogen for Fastboot images, tools and device.
rohitjaiswal @Xda For eMMC image of Yureka.
ayushtyagi28 @YU Forums for his official factory images thread so I can copy paste some steps from there.
You for trying this guide.
Me for making this guide.

Download from this link

z7 mini (nx507j) bricked - Tool Studio Error

Screenshot: imgur.com / F9MrUeO
When i press "start" in Tool Studio status is red: Can't find port.
And when i press "Refresh" usb disconnected automaticly, and connect again within ~10 seconds. Please, help.

Download from this link

bricked my A9

dottech.org/189086/how-to-install-twrp-recovery-on-htc-one-a9-guide/

I was following the guide at the above link trying to install TWRP on my A9. I had already successfully unlocked the bootloader through the HTCDev website. When I attempted to install TWRP , it failed due to S-ON error. Now it is stuck on the initial boot-up screen that says HTC, has a white background, and says powered by android at the bottom. Additionally, now that screen displays "This build is for development purposes only. Do not distribute outside of HTC without HTC's written permission. Failure to comply may result in legal action." in red letters. I have tried every combination of button pushes that I can think of in an attempt to power it down or restart it. It is stuck on that screen and will not respond. At this point I am just waiting for the battery to die.

Has anyone seen this before or have any suggestions. Thanks

Download from this link

Android Auto bricked my G4?

After a week of enjoyment with a new Skoda rental car, (Superb) with Android Auto integrated, I had lots of fun with Google Maps on my trips for the past couple of days, there were some bugs, the screen had some weird flashing issues at times, Spotify was not ideal because even my passengers could not scroll freely, but just before I returned the car my G4 shut off while driving and navigating. Only to not boot again.

After removing battery and a reboot after that the LG boot screen showing I have unlocked bootloader shows, and after that it drops dead. I just did a full REFURBISH with LG UP, (download mode is available) only to be stuck with the exact same stuff. Any suggestions welcome! Thinking memory is gone though..

Download from this link

I bricked my General Mobile 4g Android One, can someone help me?

Hello all, i tried to update the firmware to marshmallow, but it bricked the phone.
http://forum.xda-developers.com/cros...vices-t3254633

I did every step on this thread, then my phone showed only a linux penguin. And then i tried to flash stock 6.0 on this, and my phone completely gone.

I press the power button and i get no response. When i connected my phone to pc, it shows a list of partitions on my computer and says that i need to format them. I didn't format anything and that's as far as i got so far. I am downloading Ubuntu OS right now and i need a dump file of the stock rom i think but i couldn't find that and i don't know what to do.

My phone is the single sim version.
Thanks.

Download from this link

plz help me!!! my LT09 hard bricked after updating to MM

hi guys. i flashed MM successfully and when i wanted to root my device, it bricked and now i cant take it back. it's in Huawei logo now and i can take it to recovery or fastboot... what i can do??? :(:(:(:(:confused::confused::confused:

Download from this link

bricked my xperia m

i cant enter flashmode.green light turns on instantly after no light. and i cant install stock ftf. i think problem was occured when i try to install twrp recovery.img in fastbootmode when my bootloader locked.
i unlocked my bootloader.(I am not sure. my phone is not opening. it stuck in sony logo)
i can enter cwm.(but cant install rom.)

fastboot mode.
how can i fix ?

Download from this link

[HELP] Huawei Y5 bricked( stuck at boot img)

Hello, i recently rooted my Huawei Y5 and yesterday i wanted to Un-root it. i downloaded Unroot app from google play but after i pressed "unroot" button my phone restarted and now its stuck on Huawei boot image. i can open CWM and trough it i can get in bootloader, i tried to "Fastboot boot boot.img" but everytime it says FAILED (remote: dtb not found)
i did Wipe Data/factory reset, everything is same, my phone get stuck at boot img
i also downloaded few custom roms but when i try to flash them via fastboot i get error that says file is too lagre i don't know what to do, any suggesion is welcome. Sorry for my bad English i hope you can understand my problem.. :/

Download from this link

Huawei Y5 bricked( stuck at boot img)

Hello, i recently rooted my Huawei Y5 and yesterday i wanted to Un-root it. i downloaded Unroot app from google play but after i pressed "unroot" button my phone restarted and now its stuck on Huawei boot img. i can open CWM and trough it i can get in bootloader, i tried to "Fastboot boot boot.img" but everytime it says FAILED (remote: dtb not found)
i did Wipe Data/factory reset, everything is same my phone get stuck at boot img :(
i also downloaded few custom roms but when i try to flash them via fastboot i get error that says file is too lagre i don't know what to do, any suggesion is welcome. Sorry for my bad English i hope you can understand what i meant to say :)

Download from this link

Am I bricked?

Last Time i thought about little OC on my phone so I downloaded some ROM and bravely flashed it. :rolleyes:(not the smartest thing to do I know, I know)
firstly the problem was the strange boot screen with random colours.
the after 2-3 months it started shutting down and displaying this "STD_STATE 0x00...00d0d1"
so because me is smart i did a formatting of EVERYTHING.
i found a android that should work (5.0.0 lollypop).
it had some issues like robooting instead of Everything.
but now only thing that works is a:

white inscription Android
red error, STD_STATE 0x0...000
and download mode
when i try to go into recovery mode(yes i have a clockwork mod) only thing is a black screen ( I have a suspitcion that it works but just don`t display anythig because if i click like i would to reboot i clock it reboots)

Any help, reprimand or downloads :( ?

Download from this link

[SEARCH] Bricked G2 mini D620 / R / FR

Hi,

I'm looking for a briked D620, D620r or D620fr for some testing.

I want to test the unbrick method of LG G2 D80x with our D620 but don't want to brick my own D620r for it.

So if someone has a bricked D620, no recovery, no download mode and no fastboot and no other hope to unbrick I would be glad if he/she could send it to me.

I can make no promises, but if i unbrick it i'll send it back.

Please answer here and I'll send you a PM with my email address.

Download from this link