tecno h5 automatically booting into boot mode

please moderators..I have a tecno h5 that automatically boots into boot mode displaying boot selector options like fastboot, recovery, power down. but none of the options seems to work as the keys are unresponsive even after pressing the corresponding volume down button for each option. I've tried flashing with sp flash tool several times and after each successful flash, there ain't seem to be any slightest impact on these phones. when i format the whole bootloader option in format section, the phone doesn't power on and after re-flashing with a different bootloader gotten from a different h5, the issue keys reiterating. I'm kinda fed up now! any help please?...

Sent from my M5 using XDA Forums Pro

Download from this link

Help! Lumia 950 XL (HK Variant) stuck in Airplane mode!

Hi everyone,

Newbie poster here.

I use my Lumia 950XL (RM-1085 059X5F1) on Wind Mobile in Canada, and recently got an update to some SIM settings that prompted me to restart my phone. However, after restart, the phone has been stuck in airplane mode ever since...

I've tried:

-Hard reset via Settings>About
-Hard reset using the power/volume button combo
-Soft resets
-Using the WDRT
-And just now the Windows Phone Image Designer in the tutorial thread

Sadly, none of it worked. The phone is still stuck in Airplane mode and wont detect my SIM.

I'm thinking I should try one of the unbranded EU roms next and see if that would work. But I'm not sure if I do that it would void the warranty, or if I would be stuck on the EU rom after.

Anyone have any ideas?

Download from this link

오산역오피〖『ΛВΛM18ㆍn3t』〗「방학오피」『아』『찔』『한』『밤』&

오산역오피〖『ΛВΛM18ㆍn3t』〗「방학오피」『아』『찔』『한』『밤』안락오피 오산역오피〖『ΛВΛM18ㆍn3t』〗「방학오피」『아』『찔』『한』『밤』안락오피 오산역오피〖『ΛВΛM18ㆍn3t』〗「방학오피」『아』『찔』『한』『밤』안락오피 오산역오피〖『ΛВΛM18ㆍn3t』〗「방학오피」『아』『찔』『한』『밤』안락오피 오산역오피〖『ΛВΛM18ㆍn3t』〗「방학오피」『아』『찔』『한』『밤』안락오피

Download from this link

Can't get out of the TWRP recovery mode on Lenovo k3 note k50 t5 android 5.1

I got my Lenovo k3 note k50 t5 yesteday running on Android 5.1 . I wanted to root it and flash a custom ROM .
I downloader the superSU software on the device.
I flashed the TWRP2.8.6.0_k3note.img in the following steps

1) First I enabled oem unlocking from developer options on the phone
2)Since I use ubuntu , I installed the required android packages
sudo apt-get install android-tools-adb android-tools-fastboot
3)adb reboot bootloader
4)fastboot oem unlock
5)fastboot devices -> was able to recognize the device
6)fastboot flash recovery TWRP2.8.6.0_k3note.img
7)fastboot reboot

Now the problem starts . It boots into the TWRP recovery , throws some error messages , tries to reboot again and the process continues in a loop

I was able to enter into the TWRP recovery options by pressing the volume up/down button and the power key . The backup process failed and when I tries to install the superSU software , it wasb't able to detect it in the SD card . I'd definitely downloaded it . Now I can't get out of the TWRP recovery mode .

I read that the best thing to do is flash the stock ROM for K3 note ?
Where can I get the correct instructions to do so ?

Please help me out of this .

Download from this link

FASTBOOT randomly stops "seeing" my ZUK in bootloader mode

The title says it all.... the photo attached as well...
ADB devices command always seems my ZUK
when I boot into bootloader mode, my laptop starts dinging like a usb device
is plugging and unplugging randomly. Why is this happening?
Of course finally fastboot (or laptop) stops seeing my ZUK
and then guess, what? I get stuck in <WAITING FOR DEVICE>
Any ideas why is this happenig?

Download from this link

HTC M8 boots only in recovery mode

So there was an update available to my phone and when it was done it rebooted and went to recovery and now I can't get in android. It's not rooted or with any custom roms, just a stock phone. Bought from Hong Kong if it makes any difference.

Download from this link

[AUDIO] ViperFX Enforcing mode CM12/13 (Test mode).

When installing:
Archive will remove from the system folders and files :
AudioFX - (not restored after a night of updates CM)
MusicFX
SoundAlive - (when installed on a Samsung with TouchWiz - test)
their data and the path data/data.
The archive will disable NuPlayer (experimental).
The archive will prescribe need to build.prop.
ViPER4A not removed after updates, nightly builds СМ12/13.
Thanks to the author of this script .
Write about the results of the test.
Please make a backup before flashing archive.

Attached Files

ViPER-ND.zip - [Click for QR Code] (5.86 MB)

Download from this link

Can not wake up from sleep mode.

Hi, remix OS is very good. Certainly will compete windows. Without major problems I had started to offer on a laptop computer, video, Google Play, microsoft bluetooth mouse comfort, brightness control and sound, gmail, youtube. I am very happy. I just need advice on how to correct the deficiency. Can not wake up from sleep mode.:confused:
Remix OS 2
notebook HP 250 G2
number product FOY78EA BCM

Download from this link

WCDMA mode doesn't work on samsung gt-19192

I own a samsung s4 mini(gt-19192). When i change the network mode to "WCDMA/GSM(auto connect)" or "WCDMA only", it shows me "emergency calls only" and i cant surf the web or call.I can only use "GSM only" which is a lot slower.
My phone isn't rooted and runs android 4.4.2. I did a factory reset and wiped dalvik cache but no luck.
I would like to know a method to fix this problem asap.
Thanks:)

Download from this link

S4 Mini i9195 Boot loop - Recovery problem - Download mode working good

Hi to all, After two years of good working S4 mini is giving up. The last time when the problem is occured, the phone was „forced“ swiched off because of low battery. It was put on charger to charge normally and it did it as usual. But, when it was swiched on again it stayed in the boot loop on the Samsung logo over and over again. When I tried to come into recovery, it shows as normally when it starts to go into recovery with text that it has, as last, succesfully loaded CRC and then it shows for a short text: „There is no command“ and immediately reboot and come out of recovery. I went to „Download mode“ and I flashed in Odin, with no problem, the newest S4 mini official ROM but it didn't fix the problem. Any expiriance or sugestions are welcome... Thanks in advance !

Download from this link

Random Shut downs, Freezes, Download Mode and other stuff

About a week ago, I updated my CyanodgenMod 12.1 rom and, suddenly, my note began acting nuts!

It started to freeze and randomly shut down with no warning. I wouldn't be able to power it back on immediately either. I'd have to remove the battery and wait at least 30 seconds before putting it back in and starting it.

I tried downgrading to back to the previous version but, it continued to do same thing even on the previous one.

I used Odin to go back to latest Touchwiz stock firmware and the firmware did it too. I've tried almost everything and now whenever I try use Odin to go back to the previous firmware before 5.1.1 December, Odin fails and gives me this message:

<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

My bootloader says this:

UDC Start
sw REV Check Fail: [aboot] Fused 4 > Binary 3
[1] eMMc write fail: aboot

Any suggestions on what to do or what's wrong?

Download from this link

Service Mode Verizon note 5

So my compass is way off on my Note 5. I'd like to get into the service mode to so see if calibrating the magnetic sensor would fix it. But it seems Verizon has blocked the standard way *#0*# cause it does not work for me. Any one know of a different way on Verizon? A google search for me turns up nothing.

Thanks

Download from this link

How to Open USB Debug Mode on Android

1. Android 2.0-2.3.x
Settings > Applications > Development > USB Debugging.
2. Android 3.0- 4.1.x
Settings > Developer Options > USB Debugging.
3. Android 4.2.x and higher.
In Android 4.2 and higher versions, the Developer Options menu and USB Debugging option have been hidden. In former 4.X versions of Android, USB Debugging option is under Developer Options menu.
First, you need to enable "Developer Options Menu".
1. Click Menu button to enter into App drawer.
2. Go to "Settings".
3. Scroll down to the bottom and tap "About phone" or "About tablet",
4. Scroll down to the bottom of the "About phone" and locate the "Build Number" field.
5. Tap the Build number field seven times to enable Developer Options. Tap a few times and you'll see a countdown that reads "You are now 3 steps away from being a developer."
6. When you are done, you'll see the message "You are now a developer!".
7. Tap the Back button and you'll see the Developer options menu under System on your Settings screen.
Now, you can enable USB Debugging mode.
8. Go to Settings>Developer Options>USB Debugging. Tap the USB Debugging checkbox.
4. Android 5.0 Lollipop
To enable USB Debugging on Android 5.0 Lollipop is the same as Android 4.2.x.
1. Settings > About Phone > Build number > Tap it 7 times to become developer;
2. Settings > Developer Options > USB Debugging.

• To disable USB Debugging and other developer options when you don't need them, slide the switch at the top of the screen to OFF.

Download from this link

HELP ! Save in RAW Not Available Even In Pro Mode

Why ?????????????? :crying:

Download from this link

Can't enter recovery mode, tablet stuck on boot screen. (Prestigio Multipad PMP3270B)

So I have Prestigio Multipad PMP3270B and it's stuck on booting screen. I've tried to enter recovery mode using the volume UP and power button but it doesn't work.
I have also tried to boot it into recovery mode using SDK but it doesn't recognize any commands, it just says error: no devices found
I just don't know what else to try... I've tried looking for ways if I can somehow enable USB debugging using the SDK but my device isn't recognized at all by it... I have all the drivers installed and I don't know what to do.. please help me. Thanks in advance

Download from this link